We always have them by our sides, but what are thinning scissors, what are the differences between texturising and thinning scissors and when do we need to use them to thin out thick hair?
As a professional, hair thinning scissors will be used on your clients to thin out thick and dense hair. Thinning and texturising scissors are mainly used in Salons and Hairdresser studios. Thinning scissors are useful for longer and thicker hair, which is common women but not for men. The best way to help your client is by being thoroughly informed about Hair Thinning Scissors.
Once you know everything, then you can make magic in their hair.
In this article, we will be providing you with the information for you to become the magician when they come to sit down in your chair.
Hair Thinning Scissors are shears that are not your average regular shears as the two blades are different. One blade is similar to the normal hair cutting scissors. However, the other blade has gaps along with it which we call teeth. Depending on the type of hair thinning scissors bought, the number of teeth will range.
These teeth allow the professionals to remove less hair with each cut than you would get with a regular shear. It is designed explicitly with opposing blades for a specific purpose which is to give your hair a seamless look. Regardless of the style that your client is choosing, their hair will look smooth and uniformed from any angle.
Side Note: It should not be used all the time in your client’s hair and does not replace the use of a regular good ole shear.
Believe or not, the type of hair that requires the use of the thinning scissors is not as the name suggests – it’s quite the opposite. It is used on “thick or dense hair”. They are helpful when your client has a specific style in mind that they want to achieve; however, their hair needs to be manipulated to make it.
The manipulation is thinning the hair so that their style is flawless. These styles can include a pixie cut, asymmetrical bob, blending short hair, barbered cuts as well as blending extensions into layers.
Each of the methods will leave the hair uneven if a regular shear is used. Hence, the thinning scissors allow their ends to be shaped up with texture yet still looking uniformed.
You can use thinning scissors for thinning out their hair or texturizing their bulky ends to achieve their style. The preferred technique will depend on the texture and volume of your client’s hair.
Using the thinning shears to texturize hair means removing the thickness of the hair towards the end to a “thinner look and feel”. Although the ends are thin, the transition between your thick and thin hair is seamless. Also, it will add a bit of texture to your new hairstyle.
Hence, the name of the technique. Your style will be shaped to perfection with the scissors. With it positioned at different angles, you can remove less hair towards the ends of the hair. Thus, allowing you to see what you’re working with for a well-groomed result.
For this style, you would take ½ inch thick of their hair and pull it towards you. Also, pull it away from their face not to obscure your vision and place between your fingers. Your fingers should be around 3 inches away from the ends so that you’re able to see the area better.
Then, the other hand would be used for cutting the hair. You would cut from the outer corner of the section towards the inside. Then, you will repeat the steps for the other parts throughout their hair.
And voila, you’re “texturizing” their hair.
On the other hand, you can use the scissors for “thinning out” a thick or unruly hairstyle. It will give their hair a more defined shape and layers for you to work with.
As a barber/hairdresser, you will start from the midsection and work your way towards the end with the scissors positioned at different angles. In addition, their hair is being pulled taut up or down to achieve regularity while cutting it.
The weight and volume will be removed from mid-section and reduces as you go down towards the ends. Therefore, you’re “thinning out” the length of their hair. In the end, the results will be a more manicured look.
For this technique, you have to ensure that their hair is separated into different sections.
This allows you to work and clip away with ease. Depending on the length, you may need more or less than 10 sections before cutting. You would unravel each section and begin to thin their hair.
At about mid-way of the section, start cutting using the shears until you have reached the ends. The shear would be pointed towards the floor at an angle to remove the excess hair while still giving seamless results. Once the first section is done, then it’s on to the next one until all the sections are completed.
As a professional, you should have a variety of shears on hand as each works differently. And, one of the essential tools should be your “thinning shears”.
Each shear is manufactured differently with different teeth numbers, adjustable screws, for different hair textures, and so much more. However, each shear should be able to cut between 40 to 70% of the hair in just a couple of cuts.
You can have three different thinning shears including a (1) Blending and Texturizing Shears, (2) Chunking Shears and (3) Finishing Shears. Or, you can choose to have the first option alone. All of this will depend on what you’re able to work with as well as your clients’ needs.
Each shears’ teeth will fall between the range of 7 to 25 depending on the brand and purpose of that type of shear. The number of teeth will affect the amount of hair that it cuts off. If it has fewer teeth, then bigger chunks of your hair will be removed at once! However, if it has more teeth, then less hair will be gone so that you’re able to see what you’re working with.
Also, it would be great to choose a scissor with an adjustable screw in the middle. The screw will make your job more comfortable because you’re able to adjust the tension when cutting your clients hair.
You will be able to gauge it depending on the thickness, length and the desired style that you’re trying to achieve.
Next, you have to detangle your client’s hair before cutting. It allows you to remove any tangles, knots or bulges along the length of their hair.
Thus, giving you a smooth and tangle-free canvas to work with. You can use your comb, brush, tangle tweezer or even your fingers to get the job done. If your client's hair is not smoothing out because they have curly hair, then you may just have to straighten it using your flat iron or blow dryer.
Side Note: Inform your clients to keep their hair dry before getting a style done as the scissors work better on “Dry hair”.
Now unto what we’re all here for.
Then, you need to cut it.
With your shears in hand, ensure to keep it open to separate the blades. Then, hold the section of the hair that you are working with. Depending on whether you are thinning or texturizing the hair, you would hold it at different sections to get the job done properly.
Next, hold the shears at an angle of 45 degrees or diagonally. Then, cut it! You may have to angle the scissors differently while cutting their hair to get the right cuts. Ensure to keep your detangling tool on hand to keep the hair tangle-free while you’re cutting. In addition, you’re able to remove any shed or fallen hair. As a professional, you should be monitoring the work that you are doing to ensure that the right amount is removed to meet the client’s expectations.
There's a lot of information surrounding hair thinning scissors, and we’re happy to be able to provide it in a summarized version for you. Ensure to do your own further research on our blog about this topic and others related to Hair Thinning Scissors.
Clients are looking for modern haircuts from salons and barbershops in Australia. To achieve the best hairdressing styles, you will need the best hair thinning scissors. There is a common misconception that the scissors at home are the same as what professional hairdressers use. Professional scissors have different styles, from cutting scissors with a convex edge or chunking thinning scissors, let’s take a moment to learn about professional texturing scissors.
Hairdresser thinners in Australia are commonly understood as a tool to reduce hair thickness and bulk around unwanted areas. Thinning scissors are definitely not something you will find at home, as these are necessary to get the right hairstyles that your clients are asking for. Using these hairdressing thinning scissors are also useful to let the heat out during summer, so you will notice a higher demand for thinning styles around summer.
Unlike normal shears, hair thinning shears have one plain blade and one blade with teeth. The teeth range from 10 to 30 or 40 depending on the thinning performance you are looking for. These scissors do not slice through the hair in a single move, rather the teeth target small pockets of hair.
Hairdressing thinning scissors have various types and sizes, but the main thing you will notice is the number of teeth that are in each pair. Depending on the thinning performance you are looking for, you may want to go for a pair with 20-30 teeth that is quite balanced and allows you to thin with just a few moves.
You may also want to go for something that performs a bit more for thick and curly hair. These are called chunking scissors and usually have 7 to 16 teeth and are called chunking (chunk) hairdressing thinning scissors. What makes chunking hairdressing thinning scissor unique is creating notches for extremely curly hair. These thinning scissors are especially popular in Australia and New Zealand.
These Juntetsu Hair Thinning scissors are handcrafted with superior VG10 steel and designed to be lightweight. Juntetsu makes a perfect balanced blade for professional use. The craftsmanship of there clam-shaped blade and ergonomic handle makes for sharp effortless cuts for hours without straining or injury (RSI). With 30 thinning teeth on the 6" inch piece, it has a fine V-teeth serration for a pleasantly smooth feeling and a precise cut. These thinning scissors are used by professional hairdressers, and barbers in Australia and New Zealand.This Set includes A Juntetsu Thinning Scissor of your choice, a leather pouch cleaning cloth, and scissor oil.
The Jaguar Jay 2 (JAY2) Thinning Scissors are perfect for any casual, student/apprentice or professional hairdresser. The Jay 2 use a simple serration on the teeth and simple classic handles that make them easy to pick up and go.
Whether you are looking to practice cutting on mannequins or having a backup pair to use instead of your main hair cutting scissors, these Jay 2's are versatile enough to cover you in most situations.
Comments will be approved before showing up.